TF027 Heavy load rear coil springs are designed to provide 2” of lift on heavily laden vehicles for commercial and expedition use. The TF027 fits the rear of Disco1, Disco2, Range Rover Classic, and Defender 90s carrying a constant load or additional equipment weighing more than 300kg.

We usually recommend the TF023V for most Defender 90s however the TF027 is particularly good for people who want more constant load-carrying ability. Do not fit this spring if you are not carrying the load as the lift may be too great and could cause over extension of the rear shocks.  

It is important to understand that all Terrafirma Coil Springs have been designed to provide approximately 2”  (50mm) of lift while carrying light, medium or heavy loads. Minimal mechanical changes are required when lifting by this amount, however the Terrafirma Hardware range of accessories does allow for greater lift and significantly increased wheel travel, further enhancing off-road ability.

Selecting the most suitable springs for a Land Rover may be with some compromise. A heavy load spring needed when fully loaded may ride too high and too hard when unloaded. Likewise a light load spring that is comfortable and flexible will not achieve the desired lift or carry the heavy loads associated with expedition vehicles.

Load carrying coil springs are often progressive or variable (V) this provides a combination of comfort and load carrying in one spring.

It is worth noting that Terrafirma coil springs are sold in pairs, in many cases one spring is 10mm longer than the  other, the longer spring should always be fitted to the driver’s side.